S J Suresha (Aug. 2007), Processing, interface microstructure and mechanical properties of monolithic and multilayer columnar ceramic films

Debdutt Patro (Apr. 2007), Kinetics of pressureless infiltration of Al-Mg Alloys into Al2O3 reforms: a non uniform capillary model

R. Kavitha (Jan. 2005), Development and Study of oxide films by combustion flame pyrolysis

Sanjit Bhowmick (Sept. 2003), The nature of contact induced deformation and fracture in TiN films on steel

Ashutosh Suresh Gandhi (May 2001), The processing of bulk metastable amorphous and nanocrystalling ZrO₂-Al₂O₃ ceramics by pressure consolidation of amorphous powders

B. Srinivasa Rao (Dec. 1999), Pressureless infiltration of Al-Mg based alloys into Al₂O₃ preforms

Tania Bhatia (Dec. 1997), Phase evolution in the MgO-MgAl₂O₄ system under non-equilibrium processing conditions

Nagendra (Aug 1997), Processing, microstructure and fracture characteristics of high volume fraction Al₂O₃/ (Al- AiN) Matrix composites  

S. Prakash Narayan (1997), The effect of strain rate and temperature on the development of magnetic properties in nano-crystalline Nd-Fe-B alloy 

Prashant Potnis Ramesh (Jun. 2007), Study of fractur properties of NiAl bondcoats on Nickel supper alloy by three point bending of microbeams

L Rangaraj (Jan 2003), Reactive Hot Pressing of Titanium Nitride (TiN)- Titanium di-boride (TiB2) composites under moderate pressure and temperature

S R Hegde (Oct 2002) Deposition of 8 wt% Yittria Stabilized Zirconia Coatings by Flame Pyrolysis of Solution Presursor 

S. Swaminathan (Nov. 2000), Processing and characterisation of bulk Al₂O₃ p/AIN-Al composites by pressureless infiltration

R. Arvind Singh (Feb. 1997), Studies of abrasion and microresidual stresses of (Al₂O₃-SiC-[Al, Si]) Composite made by melt oxidation

H. R. Muralidhar (Aug. 1992), Al₂O₃/Al Composites from Al-Zn alloys : Growth and infiltration mechanisms

S. P. Dhandapani (Jan. 1992), Studies on the growth of Al₂O₃/Al composite into SiC preforms and Preliminary studies on the processing of intermetallic matrix composites

Poorwa Bhagwat (July. 2007), Study of fatigue of TiN coating on stainless steel by four point bending

Hari Srinivas Goripati (July 2006), Deposition of 8 mol% Yttria Stabilized Zirconia by Combustion Flame Pyrolysis and its Thermal Fatigue Study

Sugeetha V (July 2006), A Study of Contact Indentation Fatigue Damage of TiN Thin film on Stainless Steel Substrate  

Santhosh Kumar Meghani (July 2005), Synthesis of Titanium Oxide Films by Flame Spray Pyrolysis and their Characterization 

Pradeep Kumar Kraleti (July 2005), Contact Fatigue Behaviour of TiN Films by Indentation Technique

Prakash M. Kini (July 2004), Processing of Al₂O₃ - ZrO₂ - SiC Nanocomposites by pressure aided densification of bulk amorphous compacts

S. Vijay Karthik (July 2004), Preparation and characterization of lead zirconate titanate (PZT) films by flame spray pyrolysis

Satya Pal Singh (Jan 2002), To find out suitable insert parameters for stainless steel turning

Ashis Chowdhury (Jan 2001), Mathematical modeling of the mean flow stress of C-Mn steels during rolling and the prediction of rolling force

Debdutt Patro (Jan. 2000), Phase evolution studies in ZnO-Al₂O₃ as synthesised by spray pyrolysis and by citrate-gel routes

Anupam Panwar (Jan. 2000), Combustion synthesis and consolidation of 3mol% YSZ

Pankaj Kumar Jain (Jan. 1999), Processing and characteriztion of SiC_P reinforced (Al-AlN) matrix composites produced by Directed Melt Nitridation

K. R. Balasubramanian (July 1999), Low temperature synthesis of yttrium aluminate powders and films via spray pyrolysis route

M. Kumar (Jun 1998), Surface modification of Al₂O₃/SiC_P/Al composite and hot pressing of Al₂O₃/SiC whiskers

Ratna Pal (Jan 1998), Synthesis and characterisation of finely dispersed PB in alumina

Rohit Shukla (Jun 1997), Surface modification of SiC/ Al₂O₃/Al 'Dimox' composites and / hot pressing of SiC_w/ Al₂O₃ composites

Gautam Mukherjee (Jan 1997), Ball-milling of spray pyrolysed ZrO₂-Al₂O₃ powders

Srinivasan Raghavan (Jan 1996), A study on the processing and 'Levitation-Induction' sintering of composite powders

D. Srinivasa Murthy (July 1995), Hot deformation behaviour of Al₂O₃ /AlN/Al comp

Ajay Chauhan (Jan 1995), Phase evolution, segregation and grain coarsening behaviour in Al₂O₃-MgO as synthesized using spray pyrolysis

Sandeep Kumar (July 1994), Role of SiC pre-oxidation and alumina coating in processing of SiC/ Al₂O₃ /Al ceramic matrix composites

Ashutosh S. Gandhi (Jan 1994), Aerodynamic levitation and induction melting for solidification studies on a high temperature oxide system

M. V. Siva Raman (Jan 1992), Design and fabrication of a HFCVD reactor for synthesis of diamond thin films

Sanal Kumar S (June 1991), Aerodynamic levitation for undercooling studies on ceramics

H. Gopal (June 1991), On the estimation of binding energy of a - Al₂O₃